Configuring Port Dscp Translation And Rewriting; Figure 75: Configuring Port Tag Remarking Mode - SMC Networks SMCGS10C-SMART Management Manual

Figure 75: Configuring Port Tag Remarking Mode

Use the QoS Port DSCP Configuration page to configure ingress translation
C P
ONFIGURING ORT
and classification settings and egress re-writing of DSCP values.
DSCP T
RANSLATION
R
AND EWRITING
P
Configuration, QoS, Port DSCP
P
These parameters are displayed:
◆
◆
ATH
ARAMETERS
Port – Port identifier.
Ingress Translate – Enables ingress translation of DSCP values based
on the specified classification method.
– 181 –
| Configuring the Switch
C 4
HAPTER
Quality of Service