Restoring Factory Defaults; Upgrading Firmware; Figure 132: Factory Defaults - SMC Networks SMCGS10C-SMART Management Manual

| Performing System Maintenance
C 7
HAPTER

Restoring Factory Defaults

R F
ESTORING ACTORY
U F
PGRADING IRMWARE
D
EFAULTS
Use the Factory Defaults page to restore the original factory settings. Note
that the LAN IP Address, Subnet Mask and Gateway IP Address will be
reset to their factory defaults.
P
ATH
Maintenance, Restart Device
CLI R
EFERENCES
"system restore default" on page 275
W I
EB NTERFACE
To restore factory defaults:
Click Maintenance, Factory Defaults.
1.
Click Yes.
2.
The factory defaults are immediately restored, which means that no reboot
is necessary.

Figure 132: Factory Defaults

Use the Software Upload page to upgrade the switch's system firmware by
specifying a file provided by SMC/Edge-Core. You can download firmware
files for your switch from the Support section of the SMC/Edge-Core web
site.
P
ATH
Maintenance, Software Upload
W I
EB NTERFACE
To upgrade firmware:
Click Maintenance, Software Upload.
1.
Click the Browse button, and select the firmware file.
2.
– 256 –