Figure 99: Acl Status - SMC Networks SMCGS10C-SMART Management Manual

| Monitoring the Switch
C 5
HAPTER
Displaying Information About Security Settings
IPv4/ICMP: ACE will match IPv4 frames with ICMP protocol.
■
IPv4/UDP: ACE will match IPv4 frames with UDP protocol.
■
IPv4/TCP: ACE will match IPv4 frames with TCP protocol.
■
IPv4/Other: ACE will match IPv4 frames, which are not ICMP/UDP
■
or TCP.
◆ Action – Indicates the forwarding action of the ACE:
Permit: Frames matching the ACE may be forwarded and learned.
■
Deny: Frames matching the ACE are dropped.
■
Rate Limiter – Indicates the rate limiter number implemented by the
◆
ACE. The allowed range is 1 to 15.
Port Copy – Indicates the port copy operation implemented by the
◆
ACE. Frames matching the ACE are re-directed to the listed port.
Mirror - Indicates the port mirror operation implemented by the ACL.
◆
Frames matching the ACE are mirrored to the listed port. (See
"Configuring Port Mirroring" on page
CPU – Forwards packet that matched the specific ACE to the CPU.
◆
CPU Once – Forwards first packet that matched the specific ACE to the
◆
CPU.
Counter – The number of times the ACE was matched by a frame.
◆
◆ Conflict – This field shows "Yes" if a specific ACE is not applied due to
hardware limitations.
W I
EB NTERFACE
To display ACL status:
Click Monitor, Security, Network, ACL Status.
1.
Select a software module from the scroll-down list.
2.

Figure 99: ACL Status

– 216 –
191)