Figure 71: Displaying Egress Port Schedulers; Figure 72: Configuring Egress Port Schedulers And Shapers - SMC Networks SMCGS10C-SMART Management Manual

Click on any enter under the Port field to configure the Port Scheduler
2.
and Shaper.

Figure 71: Displaying Egress Port Schedulers

To configure the scheduler mode, the egress queue mode, queue shaper,
and port shaper used by egress ports:
Click Configuration, QoS, Port Scheduler.
1.
Click on any of the entries in the Port field.
2.
Set the scheduler mode, the queue shaper, queue scheduler (when the
3.
scheduler mode is set to Weighted), and the port shaper.
Click Save.
4.

Figure 72: Configuring Egress Port Schedulers and Shapers

– 177 –
| Configuring the Switch
C 4
HAPTER
Quality of Service