Figure 38: Authentication Configuration - SMC Networks SMCGS10C-SMART Management Manual

| Configuring the Switch
C 4
HAPTER
Configuring Security
Port – Network (UDP) port of authentication server used for
◆
authentication messages. (Range: 1-65535; Default: 0)
If the UDP port is set to 0 (zero), the switch will use 1812 for RADIUS
authentication servers, 1813 for RADIUS accounting servers, or 49 for
TACACS+ authentication servers.
Secret – Encryption key used to authenticate logon access for the
◆
client. (Maximum length: 29 characters)
To set an empty secret, use two quotes (""). To use spaces in the
secret, enquote the secret. Quotes in the secret are not allowed.
W I
EB NTERFACE
To configure authentication for management access in the web interface:
Click Configuration, Security, AAA.
1.
Configure the authentication method for management client types, the
2.
common server timing parameters, and address, UDP port, and secret
key for each required RADIUS or TACACS+ server.
Click Save.
3.

Figure 38: Authentication Configuration

– 110 –