Figure 12: Showing User Accounts - SMC Networks SMCGS10C-SMART Management Manual

| Configuring the Switch
C 4
HAPTER
Configuring Security
be used for an administrator account, privilege level 10 for a standard
user account, and privilege level 5 for a guest account.
P
ARAMETERS
These parameters are displayed:
User Name – The name of the user.
◆
(Maximum length: 8 characters; maximum number of users: 16)
Password – Specifies the user password.
◆
(Range: 0-8 characters plain text, case sensitive)
Password (again) – Re-type the string entered in the previous field to
◆
ensure no errors were made. The switch will not change the password if
these two fields do not match.
◆ Privilege Level – Specifies the user level. (Options: 1 - 15)
Access to specific functions are controlled through the Privilege Levels
configuration page (see
access levels:
1 – Read access of port status and statistics.
■
5 – Read access of all system functions except for maintenance and
■
debugging
10 – read and write access of all system functions except for
■
maintenance and debugging
15 – read and write access of all system functions including
■
maintenance and debugging.
W I
EB NTERFACE
To show user accounts:
Click Configuration, System, Switch, Users.
1.

Figure 12: Showing User Accounts

To configure a user account:
Click Configuration, System, Switch, Users.
1.
Click "Add new user."
2.
Enter the user name, password, and privilege level.
3.
Click Save.
4.
– 56 –
page 57). The default settings provide four