Figure 98: NAS Statistics for Specified Port
Use the ACL Status page to show the status for different security modules
D
ACL
ISPLAYING
which use ACL filtering, including ingress port, frame type, and forwarding
S
TATUS
action. Each row describes a defined ACE (see
P
ATH
Monitor, Security, Network, ACL Status
P
ARAMETERS
These parameters are displayed:
◆
User – Indicates the ACL user (see
on page 57
◆
Ingress Port – Indicates the ingress port to which the ACE applies.
Possible values are:
■
■
■
Frame Type – Indicates the frame type to which the ACE applies.
◆
Possible values are:
■
■
■
■
for a list of software modules).
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific policy.
Port: The ACE will match a specific ingress port.
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames. Note that an
Ethernet Type based ACE will not get matched by IP and ARP
frames.
ARP: ACE will match ARP/RARP frames.
IPv4: ACE will match all IPv4 frames.
– 215 –
| Monitoring the Switch
C
5
HAPTER
Displaying Information About Security Settings
page
88).
"Configuring User Privilege Levels"