Displaying Information On The Spanning Tree; Displaying Bridge Status For Sta - SMC Networks SMCGS10C-SMART Management Manual

Web smart 10-port ge switch
Hide thumbs Also See for SMCGS10C-SMART:
Table of Contents

Advertisement

| Monitoring the Switch
C
5
HAPTER

Displaying Information on the Spanning Tree

D
I
ISPLAYING
NFORMATION ON THE
D
B
ISPLAYING
RIDGE
S
STA
TATUS FOR
S
PANNING
Use the monitor pages for Spanning Tree to display information on
spanning tree bridge status, the functional status of participating ports,
and statistics on spanning tree protocol packets.
Use the Bridge Status page to display STA information on the global bridge
(i.e., this switch) and individual ports.
P
ATH
Monitor, Spanning Tree, Bridge Status
P
ARAMETERS
These parameters are displayed:
STA Bridges
MSTI – The Bridge Instance. This is also a link to the STP Detailed
Bridge Status.
Bridge ID – A unique identifier for this bridge, consisting of the bridge
priority, and MAC address (where the address is taken from the switch
system).
Root ID – The priority and MAC address of the device in the Spanning
Tree that this switch has been accepted as the root device.
Root Port – The number of the port on this switch that is closest to the
root. This switch communicates with the root device through this port.
If there is no root port, then this switch has been accepted as the root
device of the Spanning Tree network.
Root Cost – The path cost from the root port on this switch to the root
device. For the root bridge this is zero. For all other bridges, it is the
sum of the port path costs on the least cost path to the root bridge.
Topology Flag – The current state of the Topology Change Notification
flag (TCN) for this bridge instance.
Topology Change Last – Time since the Spanning Tree was last
reconfigured.
STP Detailed Bridge Status – Click on a bridge instance under the MSTI
field to display detailed information on the selected entry. The following
additional information is displayed.
Bridge Instance – The Bridge instance - CIST, MST1, ...
Regional Root – The Bridge ID of the currently elected regional root
bridge, inside the MSTP region of this bridge. (This parameter only
applies to the CIST instance.)
– 228 –
T
REE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents