Table of Contents
Advertisement
S
ECURITY
B
S
ASIC
ECURITY
There are four submenus under the Security menu as shown in
Basic Security, Advanced Security, Local Management and Remote
Management. Click any of them, and you will be able to configure the
corresponding function.
Figure 68: The Security Menu
Select Security -> Basic Security from the menu; you can configure the
basic security in the screen as shown in
Figure 69: Basic Security
◆
VPN - VPN Passthrough must be enabled if you want to allow VPN
tunnels using IPSec, PPTP, or L2TP protocols to pass through the
Router's firewall.
PPTP Passthrough - Point-to-Point Tunneling Protocol (PPTP)
■
allows the Point-to-Point Protocol (PPP) to be tunneled through an
IP network. To allow PPTP tunnels to pass through the Router, keep
the default, Enabled.
L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the
■
method used to enable Point-to-Point sessions via the Internet on
the Layer 2 level. To allow L2TP tunnels to pass through the Router,
keep the default, Enabled.
– 82 –
| Configuring the Router
C
4
HAPTER
Figure
69.
Security
Figure
88:
Advertisement
Table of Contents
