Configuring The Print Server; Install The Smc Printer Port Monitor - SMC Networks Barricade SMC7004ABR User Manual

C
ONFIGURING THE
If you want to use the print server built into the Barricade Router,
then you must first install the Port Monitor program as described
in the following section for Windows 95/98/Me/NT/2000.
To configure the Barricade Print Server for Windows 95/98/Me/
NT/2000, or Unix, see "Configure the Print Server" on page 66.

Install the SMC Printer Port Monitor

Skip this section if you are using Unix.
For Windows 95/98/Me/NT/2000 clients, you need to install the
port monitor program as described in this section.
1. Insert the installation CD-ROM into your CD-ROM drive.
Under the Print Server directory, run the setup.exe program.
The SMC Port Monitor installation program advises you to
close all other Windows programs currently running on your
computer. Click Next to continue.
2. The next screen indicates that the print client uses TCP/IP
network protocol to monitor print requests. Click Next.
P
RINT
S
ERVER
63