Table of Contents
Advertisement
Click "Access Control->Target" in the left to enter the Target Settings
2.
page. Add a new entry with the Target Description is Target_1 and
Domain Name is www.google.com.
Click "Access Control->Schedule" in the left to enter the Schedule
3.
Settings page. Add a new entry with the Schedule Description is
Schedule_1, Day is Sat and Sun, Start Time is 1800 and Stop Time is
2000.
Click "Access Control->Rule" in the left to return to the Access Control
4.
Rule Management page. Select "Enable Internet Access Control" and
choose "Deny the packets not specified by any access control policy to
pass through the Router".
Click the "Add New" button to add a new rule as follows:
5.
In Rule Name field, create a name for the rule. Note that this name
■
should be unique, for example Rule_1.
In Host field, select Host_1.
■
In Target field, select Target_1.
■
In Schedule field, select Schedule_1.
■
In Action field, select Allow.
■
In Status field, select Enable.
■
Click Save to complete the settings.
■
Then you will go back to the Access Control Rule Management page and
see the following list.
Select Access Control->Host from the menu; you can view and set a
H
OST
Host list in the screen, as shown in
the Access Control Rule.
Figure 79: Host Settings
Host Description - Displays the description of the host and this
◆
description is unique.
C
HAPTER
Figure
79. The host list is necessary for
– 92 –
| Configuring the Router
4
Access Control
Advertisement
Table of Contents
