Telnet Server Commands; Ip Telnet Port; Ip Telnet Server; Table 4-14. Telnet Server Commands - SMC Networks 100BASE-TX Management Manual

Telnet Server Commands

Command

ip telnet port

ip telnet server

ip telnet port
This command specifies the TCP port number used by the Telnet interface. Use the
no form to use the default port.
Syntax
ip telnet port port-number
no ip telnet port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
23
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
Related Commands
ip telnet server (4-33)
ip telnet server
This command allows this device to be monitored or configured from Telnet. Use the
no form to disable this function.
Syntax
[no] ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#

Table 4-14. Telnet Server Commands

Function
Specifies the port to be used by the Telnet interface
Allows the switch to be monitored or configured from Telnet
System Management Commands
4
Mode Page
GC 4-30
GC 4-30
4-33