Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 1039

Configuring Server Load Balancing
6
Select MS Loopback Adapter from the Adapter pull-down window.
Select the "MS Loopback
Adapter" from the
"Adapter" pull-down
window.
7
Click the Select an IP address radio button.
Select the "Select
an IP address"
radio button.
8
Enter the Virtual IP (VIP) address in the IP Address window.
Note. Use the same subnet mask as for the physical IP interface.
9
Click the OK button.
OmniSwitch AOS Release 6 Network Configuration Guide September 2009
Configuring the Server Farm
Enter the VIP
address here.
Click "OK" when
done.
page 44-13