OmniSwitch 6450 Chassis and Hardware Components
Removing Expansion Modules
If applicable, remove any attached network cables from the module.
1
Loosen the thumb screws at the left and right sides of the module's front plate.
2
3
When the thumb screws are loosened and the module front plate is free from the chassis, grasp the
thumbscrews and pull the module straight out of the chassis. Store the module in a static-free environment
(e.g., an anti-static bag).
OmniSwitch 6450 Hardware Users Guide
January 2015
Removing Expansion Modules
page 2-39