Hot-Swapping / Removing Power Supplies - Alcatel-Lucent OmniSwitch 6570M Hardware User's Manual

Chassis and Power Supplies
Note. The chassis does not provide an on/off switch. Connecting a the power supplies to a power source
will boot the switch.

Hot-Swapping / Removing Power Supplies

When removing a power supply, first disconnect the power cord from the power source. Once the
1
power cord is disconnected, pull the power cord out of the power supply housing.
Pressing the lock tab toward the center of the power supply, as shown, will free the power supply from
2
the chassis.
OmniSwitch 6570M Hardware Users Guide December 2022
Power Supplies
Lock Tab
page 3-23