Precautions For Installation; Installing The Cx-Process The Cx-Server - Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual

Installing and Uninstalling the Software

2-1-3 Precautions for Installation

2-1-4 Installing the CX-Process the CX-Server

1, 2, 3...
52
Note Do not uninstall the CX-Server Driver Management Tool or the CX-Server from
the control panel. Doing so may make it impossible to use certain Units.
• Close all programs running on Windows before starting the installation proce-
dure.
• Do not stop the setup process in the middle. Copied files may remain in the
installation folder.
• Do not turn OFF or reset the computer in the middle of the installation process.
Computer data may become corrupted.
• The administrator or a user with administrator rights must perform the installa-
tion. Other users will not have sufficient write permission and access errors will
occur.
Note Internet Explorer version 5.0 or higher must be installed in advance to use the
CX-Server Installer. Install Internet Explorer version 5.0 in advance if it is not al-
ready installed.
1. Place the CX-Process installation disk (CD-ROM) into the disk drive.
2. Double-click the Setup.exe Icon in the CX-Process Tool\Disk1 folder in the
CD-ROM from Windows Explorer or other software.
A dialog box indicating that setup preparations are in progress will be dis-
played and then the InstallShield Wizard will be displayed. Click the Next
Button.
Section 2-1