Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 111

Overview of User Interface
Pop-up Menus (Menus Displayed by Clicking Right Button)
Pop-up menu command
Paste: Function Block
Delete Function Block Diagram
Register
Control Block
Field Terminal
Sequence Control
User Link Link Input
Table (Read
from CPU
Memory)
Link
Output
(Write to
CPU
Memory)
Register
Block Cell
Remove
Block Cell
User-de-
Edit
fined
Analog
Block
I/O Cell
Delete
Analog
I/O Cell
Insert
User-de-
fined
Block
Monitor ITEM List
Tuning Screen
Validate Start
Action c o
Stop
Delete Line
Release Selection
Delete selected lines
84
Description
Pastes a function block selected on the
Project Workspace Screen to the desired
position.
Deletes a function block that was pasted.
Directly registers a Control block in the
block diagram.
Directly registers a Field Terminal block
in the block diagram.
Directly registers a Sequence Control
block in the block diagram.
Directly registers a User Link Table block
used to read data from the CPU Unit in
the block diagram.
Directly registers a User Link Table block
used to write data to the CPU Unit in the
block diagram.
Registers a cell in the User Link Table
block that was pasted.
Removes a cell from the User Link Table
block that was pasted.
Used to edit the input interface or output
interface of a user-defined block
Deletes the input interface or output
interface of a user-defined block
Inserts a user-defined block into the
block diagram.
Same as selecting Monitor/ITEM List
from the Execution Menu.
Same as selecting Monitor/Tuning
Screen from the Execution Menu.
Starts the validation of open block
diagrams.
Stops the validation of open block
diagrams.
Deletes software connection line
between function blocks when the line
itself has been selected (displayed in
red).
Clears the selection of lines selected by
clicking the left mouse button on function
blocks or ITEMs (displayed in pink).
Deletes all the lines that have been
selected by clicking the left mouse button
on function blocks or ITEMs (displayed in
pink).
Section
Conditions for selection
When the cursor is in the position
where a function block can be pasted
When the cursor is on a function block
to be deleted
---
When the cursor is at the position in
which the User Link Table block was
pasted
When the cursor is at a cell registered
in the User Link Table block was
pasted
When an input or output interface for a
user-defined block is selected
When the cursor is positioned where a
function block can be pasted
When the cursor is positioned on a
function block that has been pasted
When the cursor is positioned on a
function block that has been pasted
---
---
When the cursor is on a line
---
When the cursor is positioned on a
function block that has been pasted or
when an ITEM has been selected
(displayed in pink)
2-2