Intended Audience; General Precautions; Safety Precautions - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Intended Audience

1

Intended Audience

2

General Precautions

! W A R N I N G
3

Safety Precautions

! W A R N I N G
! W A R N I N G
! C a u t i o n
! C a u t i o n
! C a u t i o n
xii
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for using CX-Position. Be sure to read this
manual before attempting to use CX-Position and keep this manual close at
hand for reference during operation.
It is extremely important that CX-Position and related devices be used for the
specified purpose and under the specified conditions, especially in applica-
tions that can directly or indirectly affect human life. You must consult with
your OMRON representative before applying CX-Position and related devices
to the above mentioned applications.
Never attempt to disassemble any Units while power is being supplied. Doing
so may result in serious electric shock.
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electric shock.
Save parameters and other data to flash memory after transferring them to
the Position Control Unit (referred to as NC Units in this manual). If parame-
ters and other data are not saved to flash memory, data will return to their pre-
vious values the next time power is turned ON, possibly resulting in Unit
malfunction.
Confirm the safety of the destination node before transferring parameters or
other data to the node. Transferring parameters or other data without confirm-
ing safety may result in injury.
Do not save data to flash memory during memory operation or while the
motor is running. Doing so may result in unexpected operation.
1