Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 158

Creating Function Block
Changing from CX-Server to FinsGateway
1, 2, 3...
Changing from FinsGateway to CX-Server
1, 2, 3...
2. Select File - Show Driver Select Dialog - Show.
1. Open the project for which the communications driver is to be changed, and
select a node from the project tree.
2. Select Settings - Change PLC from the menu, or right-click and select
Change PLC from the pop-up menu.
3. The Change PLC Dialog Box will be displayed. Press the Setting Button for
the network type.
4. The Network Setting Window will be displayed. If the node number is 0, input
a value other than 0 and then press the OK Button.
Note The number 0 cannot be used with FinsGateway, so input a value of 1
or higher.
5. Save the project.
6. Restart the CX-Process Tool and select FinsGateway as the communica-
tions driver.
7. Open the saved project.
1. Select CX-Server as the communications driver and start the CX-Process
Tool.
2. Open the project for which the communications driver is to be changed.
3. A message will be displayed saying that the CX-Server project file does not
exist or is corrupted, and asking if a new **.cdm file should be created. Press
the OK Button.
4. Save the project. This completes the operation.
Section 3-1
131