Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 331

Tuning
1, 2, 3... 1. Click on Check MF Button in the upper-left corner of the Tuning Screen. The
Input Selection Dialog Box will be displayed.
2. Select an input (Input 1 to 8) and click the OK Button.
The following Confirm MF Dialog will be displayed. Each label (NL, NS, ZR,
PS, and PL) will be displayed in a different color and the graph will show the
output levels (Y-axis) corresponding to the input values (X-axis).
Section 4-7
305