Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 280

Table of Contents

Advertisement

Downloading, Uploading and Comparing Data
254
2. Click the OK Button to overwrite the function block file in the destination
Loop Controller. The following dialog box will appear unless the data in func-
tion blocks are to be downloaded.
3. The following dialog box will appear.
Select the field.
• Initial setting data (S):
• Operation data (O):
• Initial setting data and operation data (S and O):
All the above items (The data in an LCU/LCB element in the function block
file (.ist) and mnemonic data)
With an LCBjj, checkmark selection boxes will be displayed in the dialog
box. Turn these selections ON or OFF and then click the Start Button.
Checkmark
selection
Update User Link
If this item is check marked, the refresh cycles for the tags in
Table Refresh Cycle
the user link table will be changed to the operating cycle for
the function block to which the software connection is made.
Transfer FBD
This item is valid only when downloading by function block.
Information
(FBD information is automatically downloaded when an
LCU/LCB element is downloaded.)
If this item is selected, the layout information for the selected
function block diagram will be downloaded. If this item is not
selected, the layout information will not be downloaded.
Backup LCB Data to
If this item is check marked, the data that is downloaded will
FROM
also be backed up in flash memory in the Loop Controller. If
this item is not selected, the data will not be backed up.
Transfer data to
If this item is check marked, connection data, tags,
Memory Card
comments, and annotations that are downloaded will also be
backed up to the Memory Card. If this item is not selected,
the data will not be backed up.
Note
Card is installed in the CPU Unit.
Supported for LCBjj Ver. 2.00 or earlier only.
Initial settings for each function block and step
ladder programs
Operating parameters for each function block.
This cannot be selected for LCU/LCB element
downloads.
Meaning
This item is automatically selected when a Memory
Section
4-3

Advertisement

Table of Contents
loading

Table of Contents