Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 134

Creating Function Block
1, 2, 3...
ITEM
004 System common operation cycle (s)
1: 0.1; 2: 0.2; 3: 0.5; 4: 1; 5: 2
018 Start mode
0: HOT (In the time), 1: Hot, 2: Cold, 3: CPU
042 LCU numbers (Loop Control Unit only)
0: Basic; 1: Expansion 1; 2: Expansion 2
043 First address in the DM Area for node
terminals (Loop Control Unit only) (The same
address must be used for LCU number 0, 1,
and 2.)
1. Double-click 000.System Common under the System Common Block fold-
er. The following dialog box will appear in the right pane.
2. Input the default System Common Block settings.
The following example shows how to set the System Common Operation
Cycle, for example.
Double-click the ITEM 004 line. The following dialog box will appear.
3. Input the data value and click OK. To set the next ITEM, click Next. To set the
previous ITEM, click Back.
Data
Section 3-1
Data range Default
1 to 5 4
0 to 3 1
0 to 2 0
0 to 32767 16020
(in one-word
increments)
107