Upgrading With Non-Hot-Plug Hdds/Ssds - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
7.8.2

Upgrading with non-hot-plug HDDs/SSDs

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
Upgrading with non-hot-plug HDDs/SSDs
▶ Install the non-hot-plug HDDs/SSDs, see
SSD" on page
▶ Install the non-hot-plug cage, see
page 302.
304
68.
"Handling the fan bridge" on page
301.
Upgrade and Maintenance Manual
82.
83.
130.
Hardware: 10 minutes
107.
49.
50.
51.
67.
"Installing a non-hot-plug HDD/
"Installing the non-hot-plug cage" on
92.
TX2550 M5