Removing Glue - Epson ML-13000 User Manual

ML-13000 User's Manual
When the measured value is 0.05 to 0.1 N or less, we recommend reapplying the glue.
However, this standard value may differ depending on the type of fabric being used, so make your determination
based on your environment and fabric.

Removing Glue

Pour the glue remover from the front of the machine and scrape the glue away.
This section describes the procedures for using the glue remover recommended by Epson.
The illustrations shown here may differ from the model you are using.
Required number of workers
Personal protective equipment
Required Items
Felt rod
Maintenance
Min. 2 persons
The following is the protective equipment that must be worn when using the glue or
glue remover recommended by Epson. For details, refer to the instructions of the SDS
for the glue and glue remover you are actually using.
Eye protection (For organic solvent use; Optimal
is a goggle-type that seals against your face)
Gas mask (For organic solvent use)
Protective gloves (Butyl or polyurethane)
Protective clothing (Long-sleeved)
Hat or hair net (People with long hair must tie
their hair and also wear a hair net.)
Safety shoes
Quantity Details/Use
1 Supplied
295
Attach felt and install this in the machine
interior for use.