Inspection/Cleaning Procedure; Checking The Area Around Operating Parts - Epson ML-13000 User Manual

ML-13000 User's Manual

Inspection/Cleaning Procedure

Checking the Area Around Operating Parts

Inspect the area around operating parts before turning on the power.
Inspection items
Check if there are any tools, hardware, or other items in the area.
❏ Remove tools and hardware.
If you turn on the power when there are tools, hardware, and other such items placed on the belt, they may get
caught in the belt or print head, resulting in damage to the printer. Before turning on the power, make sure
that there are no objects on the belt, around the print head, or near any other moving parts.
Check for any dirt or dust.
❏ If the operating parts are dirty, wipe them clean using a cleaning cloth dampened with water.
"Checking the Area Around Operating Parts" on page 164
U
❏ Clean the cleaning brushes and scraper if they are dirty.
"Cleaning the Belt Cleaning Unit" on page 193
U
Is the tape peeling off?
❏ Is the tape on the tension roller peeling off?
If the tape on the tension roller is peeling or torn, cut off the area and re-attach it so that it does not stick up.
"Applying Tape to the Tension Roller" on page 204
U
Are there any signs of ink pooling or leaks around the printer?
❏ If there is an ink leak inside the machine, clean the ink path.
"Inspecting/Cleaning the Ink Path" on page 186
U
❏ If there is an ink leak around the place where the ink supply units are loaded, check whether the ink supply
units are properly loaded and that the ink supply tubes are not damaged. If there is any visible damage, contact
our qualified service personnel.
❏ If waste ink is leaking from the waste ink bottle, replace the waste ink bottle.
"Replacing the Waste Ink Bottle" on page 211
U
Are there any water leaks around the printer?
❏ Check to see if there are leaks in the drain pipe joint located at the bottom of the belt cleaning unit or if it is
loose. If it is leaking or loose, tighten it.
Inspection locations
Perform a visual check.
❏ Belt / Guide beside the belt
❏ Inside/lower part of the belt cleaning unit
Maintenance
164