Stopping Printing; How To Use Web Config; Instructions For Starting - Epson ML-13000 User Manual

ML-13000 User's Manual

Stopping Printing

Use the following procedure to stop printing while a job is printing.
A
Select the job to stop printing from the Job List, and click
Or, open the right click menu on the name of the job to stop printing and select Canceled.
B
When the confirmation screen appears, click Yes.

How to Use Web Config

This section provides an overview of how to start the software and its functions.

Instructions for Starting

Start the software in a browser on a computer connected to the same network as the printer.
A
Check the printer's IP address.
You can check the value set for the printer in all Wi-Fi/network settings - Network Status on the control
panel.
"General Settings Menu" on page 350
U
B
Open a browser on a computer connected to the same network as the printer.
C
Enter the printer's IP address in the address bar of your browser.
Example: http://192.168.192.168
D
Click Log in at the top-right of the screen, and then enter your User Name and administrator password.
Enter the default values when starting up for the first time or when the User Name and Password have been
initialized.
Leave the User Name blank.
Enter the printer's serial number as the Password.
c
Important:
Do not continue to use the default administrator password, change it to a new one. Set your own User
Name.
See the following for the setting procedure.
"How to Set/Change the User Name and Administrator Password" on page 53
U
Save the User Name and administrator password you set in a safe location so that you do not forget them.
Before Use
(Canceled) in the Job toolbar.
52