Epson ML-13000 User Manual page 292

ML-13000 User's Manual
❏ Parts of the fabric rise slightly
The fabric and the belt do not stick to each other and the fabric rises slightly even when the pressure roller is
applied.
A
Cross section
B
Fabric rises slightly
C
Fabric
D
Belt
❏ When you touch the belt with your hand, you can see that the adhesive strength has almost gone
Check for water droplets on the belt
When water droplets remain on the belt, it may indicate that the glue has peeled off, as shown in the illustration
below.
When water droplets remain on the belt, it may be due to causes other than the glue peeling off.
See below if water droplets remain on the belt even after reapplying the glue.
"Water droplets remain on the belt after belt cleaning" on page 376
U
Maintenance
292