Rear Panel - Epson ML-13000 User Manual

ML-13000 User's Manual

Rear Panel

A
Tension adjustment dial
Adjusts the tension applied to the fabric by the tension roller. The top meter indicates tension.
To adjust the tension, pull the dial upward to unlock it.
Turn to right : Raises the tension.
Turn to left : Lowers the tension.
The default value is 0.2 Mpa. If wrinkles still appear, increase the value to 0.45 Mpa.
The value is 0 Mpa when the tension switch is off.
After adjusting the value, press down and lock the dial.
B
Slack detection switch
Use this switch to change the operation of the slack detection sensor.
Off : Disabled
On : Enabled
C
Feeding roller switch
Use this switch to change the operation of the feeding roller.
Free : There is no limitation on the rotating direction of the feeding spindle.
Use this switch when attaching or removing fabric, and when connecting an external feeding
device.
Left : Prints on the inner side of the fabric roll.
The feeding spindle rotates toward the rear of this machine.
Right : Prints on the outer side of the fabric roll.
The feeding spindle rotates toward the front of this machine.
Before Use
20