Automatic Adjustment - Epson ML-13000 User Manual

ML-13000 User's Manual
However, the following fabrics may cause a pattern reading failure.
❏ Fabric with a weave density of 25 strands/inch or less
❏ Colored fabric
❏ Fabric with a sheen or patterns
❏ Transparent fabric
A
Fabric
B
Belt
C
Fabric with a sheen or patterns
D
Transparent fabric
When using the above fabrics, perform Manual from Print Head Alignment and Manual from Fabric Feed
Adjustment.
"Print Head Alignment (Manual)" on page 136
U
"Fabric Feed Adjustment (Manual)" on page 138
U

Automatic Adjustment

Landing site displacement and fabric feeding are automatically adjusted while printing the pattern.
A
Check that the printer is ready, and load the fabric according to the actual usage conditions.
B
From the menu button on the control panel, touch General Settings - Printer Settings to set the Print
Width and Print Start Position.
C
Touch Fabric Settings - Print Adjustments - Automatic Adjustment, in that order.
Basic Operations
A A
135