Epson ML-13000 User Manual page 259

ML-13000 User's Manual
I
With the water supply turned off, attach the coupler to the hose connected to the unit and manually tighten
the nut until it is firmly attached to the hose.
J
Tighten the nut further with a wrench.
Tighten firmly until there is no gap between the nut and the blade lock.
K
Unfold the hose you folded and check that water is flowing into the cleaning tank.
L
Push the belt cleaning unit back to its original position, and then touch the Complete button on the control
panel.
Maintenance
259