Loading The Fabric Into The Printer; U "Loading The Fabric Into The Printer - Epson ML-13000 User Manual

ML-13000 User's Manual
Note:
When using fabric without tension (Slack mode) and using a short fabric roll
Place the fabric roll such that it covers the shaded area shown in the illustration below.
A
Printer center
B
Sensor
C
Feeding spindle
D
Placement area when using a fabric roll with the printable area on the inside of the roll
E
Placement area when using a fabric roll with the printable area on the outside of the roll
<Example of placement when using a fabric roll with the printable area on the inside of the roll>
A
Printer center
B
Placement area
C
Fabric roll

Loading the Fabric into the Printer

The method of loading the fabric varies depending on the type and thickness of the fabric.
Load the following types of fabric while applying tension to the fabric.
❏ Fabrics less than 1 mm thick
Basic Operations
300 mm
300 mm
150 mm
76