Replacing The Washing Scraper - Epson ML-13000 User Manual

ML-13000 User's Manual

Replacing the Washing Scraper

❏ When the washing scraper is worn out and water droplets remain on the belt after Belt Cleaning
Replace the washing scraper with a new one immediately.
Make sure you use a replacement washing scraper for this printer.
"Options and Consumable Products" on page 381
U
❏ When a message is displayed indicating the time to replace the washing scraper is approaching
Prepare a new washing scraper as soon as possible. When you want to perform replacement at this stage, such
as due to night operations, select Maintenance - Replace Maintenance Parts - Replace Washing Scraper, and
then do the replacement work. If you replace it without selecting Replace Washing Scraper, the washing
scraper counter will not operate correctly.
❏ When a message is displayed indicating it is time to replace the washing scraper
Replace the washing scraper with a new one immediately. Failure to perform replacement may result in water
droplets remaining after belt cleaning. Make sure you use a replacement washing scraper for this printer.
There are two washing scrapers at the back of the belt cleaning unit. When replacing them, replace them both at
the same time.
Required Items
A
Check that Lift Up is displayed in Belt Cleaning Tank on the Home screen on the control panel.
When Lift Up is displayed, you can pull out the belt cleaning tank.
When Set Down is displayed, touch the display area and lower the cleaning tank.
B
From the Maintenance screen on the control panel, touch Maintenance - Replace Maintenance Parts -
Replace Washing Scraper, in that order.
Maintenance
Protective gloves and clothing
224