Maintenance; When To Perform Various Maintenance Operations; Inspection/Cleaning - Epson ML-13000 User Manual

ML-13000 User's Manual

Maintenance

Cleaning and replacement of consumables must be performed to ensure the print quality of the printer. Failure to
perform maintenance could result in reduced print quality.
This chapter explains the procedures for performing appropriate maintenance.

When to Perform Various Maintenance Operations

Inspection/Cleaning

Item
Inspecting Around the Operating Parts
Cleaning the Area Around Operating
Parts
Checking/Adjusting the Air Pressure
Inspecting/Applying Tape to the Tension
Roller
Inspecting/Cleaning the Sensors
Inspecting the Emergency Stop Device
Inspecting/Draining the Air Supply
Regulator
Inspecting/Cleaning the Cleaning Pad
Inspecting/Cleaning the Flushing Pad
Inspecting/Cleaning Around the Print
Head
Inspecting/Cleaning the Ink Path
Cleaning the Cleaning Pad Blades
Drying the Sponge Roller
Cleaning the Belt Cleaning Unit
Cleaning the Suction Caps
Cleaning the Mist Filter
Maintenance
Frequency
Everyda Every Every
y week month
Inspecti Cleaning
on
156
Timing
Before turning on the power
Before turning on the power
Before turning on the power
Before turning on the power
After turning on the power
After turning on the power
After turning on the power
Before starting printing
After printing ends
After printing ends
After printing ends
When there is an ink leak
After turning on the power
After printing ends
After printing ends
When the unit is clogged with lint or
dust
After turning on the power
Before print head refresh
Before turning on the power