Applying Glue - Epson ML-13000 User Manual

ML-13000 User's Manual

Applying Glue

Pour the glue from the front of the machine and apply it to the entire belt.
This section describes the procedures for using the glue recommended by Epson.
The illustrations shown here may differ from the model you are using.
Required number of workers
Personal protective equipment
Required Items
Insulating tape
Maintenance
Min. 2 persons
The following is the protective equipment that must be worn when using the glue or
glue remover recommended by Epson. For details, refer to the instructions of the SDS
for the glue and glue remover you are actually using.
Eye protection (For organic solvent use; Optimal
is a goggle-type that seals against your face)
Gas mask (For organic solvent use)
Protective gloves (Butyl or polyurethane)
Protective clothing (Long-sleeved)
Hat or hair net (People with long hair must tie
their hair and also wear a hair net.)
Safety shoes
Quantity Details/Use
1 Dedicated Consumables/
Commercially Available
Items
316
Used when performing belt curing.
25 mm (0.98 inches) wide and 0.2 mm
(0.008 inches) thick