Epson ML-13000 User Manual page 28

ML-13000 User's Manual
Displays the current time and the temperature and humidity around the printer. If the temperature and
humidity are out of range for the printer's operating environment,
the printer within the range of the printer's operating environment. The footer also appears similarly on other
screens.
I
Heated pressure roller
Displays the current temperature, set value, and raised/lowered status of the heated pressure roller.
Preheat Start
If you touch the panel when the Heater under Fabric Settings - Current Settings is On, the machine will
pre-heat using the value set in Set.
Touch the Preheat Start button when you want to start preheating before receiving a print job.
Once preheating starts, the following will be displayed until the machine reaches the set temperature.
: Heating
: Cooling
Current Temperature
Displays the current temperature of the heated pressure roller.
Set
Displays the set temperature of the heated pressure roller.
You can adjust the temperature by touching
is On.
Roller position
Displays the raised/lowered status of the heated pressure roller.
The display changes as follows, depending on the status.
: Raised status
: Lowered status
When printing, make sure that the roller is lowered.
If you print while the roller is raised, the fabric may drift up and shift the print position.
See the following if you want to raise/lower the roller.
"Inside Rear" on page 16
U
Before Use
appears. For high-quality printing, use
/ when the Heater under Fabric Settings - Current Settings
28