Epson ML-13000 User Manual page 21

ML-13000 User's Manual
D
Pause button
Use this button to pause printing and move the print head to the left as viewed from the front of the machine.
Touch the Resume button on the control panel to resume printing.
E
Backfeed button
Press and hold this button to feed the belt in the reverse direction (from front to rear).
F
Feed button
Press and hold this button to feed the belt in the forward direction (from rear to front).
G
Tension switch
Use this switch to enable/disable the tension.
Off : Disabled
On : Enabled
H
Pressure roller switch
Use this switch to change the operation of the heated pressure roller.
If you spin it to the left then let go, the switch automatically returns to the standby position (center).
If you spin it to the right, the switch stays in that position and continues operation. To stop operation, manually
return the switch to the standby position (center).
Left : The heated pressure roller lowers. The roller automatically rises up after a few seconds.
Right : When the rear cover is open, the heated pressure roller stays down a few seconds longer than
when the switch is turned to the left.
When the rear cover is closed, the heated pressure roller lowers and moves back and forth.
When the switch is moved to the standby position (center), the roller stops and is raised.
When the heated pressure roller is lowered or moving back and forth, the roller will rise regardless of the switch
operation in the following cases.
❏
When a certain amount of time has passed while the belt is stopped
❏
When the rear cover is open
Before Use
21