Belt Cleaning Unit - Epson ML-13000 User Manual

ML-13000 User's Manual
Guides the print head as it moves.
Be sure to grease the print head periodically to ensure smooth operation.
"Adding Grease to the Scan Spindle" on page 260
U
K
Belt
This attaches and fixes the fabric for smooth printing and fabric feeding.
L
Ink supply unit
This machine uses two 1.6 L ink supply units for each color. You need to install four of each of the pretreatment
agent and overcoat agent, and two of the coloring agent. Normally, one ink supply unit continues to be used.
Once the remaining amount of ink falls below the limit, the printer automatically switches to the other ink
supply unit. As a result, even if the remaining amount of ink falls below the limit during printing, the ink
supply unit can be replaced without interrupting printing. You can also manually switch to the other ink supply
unit of the same color if necessary. The switching operation is done from the Home screen.
"Home Screen" on page 24
U
M
Mist filter
Removes the mist collected by the mist collection fan.
Clean the mist filter when it becomes dirty.
"Cleaning the Mist Filter" on page 200
U

Belt Cleaning Unit

A
Belt cleaning tank
Before Use
13