Epson ML-13000 User Manual page 192

ML-13000 User's Manual
B
Make sure the machine has stopped, and then pull out the belt cleaning unit.
Hold the handles on the front of the belt cleaning unit to pull it out.
C
Squeeze the sponge roller to dry it out. Squeeze the entire length of the sponge roller until no more water
drips out.
Do not squeeze the sponge roller by twisting it.
In the following cases, the condition of the sponge roller, glue applied to the belt, or washing scraper may
have deteriorated.
❏ When the sponge roller is absorbing more water than usual
❏ When water droplets form on the belt even after drying the sponge roller
If you continue to use this function, the print result may become uneven or blurred.
See the following and take appropriate action.
"Water droplets remain on the belt after belt cleaning" on page 376
U
D
Push the cleaning unit back to its original position.
Maintenance
192