Epson ML-13000 User Manual page 214

ML-13000 User's Manual
F
Hold the spindle and roll and pull them out, and remove the wiper roll.
G
Place the used wiper roll in the bag of the new wiper roll.
H
Install a new wiper roll.
c
Important:
❏ Install the wiper roll so it does not sag. If it sags excessively, eliminate the sag.
❏ Make sure that the fabric edge of the new wiper roll is not going beyond the spindle.
If the fabric goes beyond the spindle, the machine may not operate properly.
Maintenance
214