Oil Pressure Switch; Brake Light Switch - Honda V65 MAGNA 1985 Manual

SWITCHES
OIL PRESSURE SWITCH
REAR BRAKE LIGHT SWITCH
CONTINUITY: BELOW
0.3 ± 0.1 kg/cm
2
(4.3 ±
,.4
psi)
Do not overtighten the switch, or the crank-
case may be damaged.
BRAKE LIGHT SWITCH
OIL PRESSURE SWITCH
NOTE:
Drain the engine oiL
Disconnect the oil pressure switch lead and remove
the switch.
Check for continuity while applying press\lre to the
switch.
Replace the switch
jf
nece~ary.
Apply a liquid sealant to the switch threads before
installing the switch.
Screw the switch into the crankcase and leave two
threads from the bottom. Then tighten it to the
specified torque.
TORQUE: 10-14 N·m (1.0-1.4 kg-m, 7-10 ft-Ibl
Check the rear brake light switch for continuity
with the rear brake applied.
Check the front brake tight sWitch for continuity
with the front brake applied.
Replace the switches if necessary.
FRONT BRAKE LIGHT SWITCH
21-2