Honda V65 MAGNA 1985 Manual page 254

FRONT WHEEL/SUSPENSION
Measure between the outside surface of the right
~
brake disc and the inside of the right caliper holder
with a 0.7 mm (0.028 in) feeler gauge.
If the gauge cannot be inserted, pull the right fork
out until the gauge can be inserted.
•
•
0.7
mm
(0.028
in)
FEELER GAUGE
Tighten the axle pinch bolt to the specified torque.
TORQUE; 18-30 N·m (1.8-3.0 kg·m, 13-22ft-lbl
There should still
be
at least 0.7 mm (0.028 in)
clearance between the caliper holder and disc.
CAUTION:
After itlSta/ling the wheel, apply the brakes
several times and recheck tile clearance
Ofl
both sides. Failure to provide clearance will
damage the brake discs Qnd affect braking
efficiency.
Install the speedometer cable.
15-24
FRONT AXLE
I
SPEEDOMETER CABlE