Honda V65 MAGNA 1985 Manual page 224

DRIVE TRAIN
Clean all sealing material off the mating surface of
the gear case and cover.
NOTE:
Keep dust and dirt OUt of the gear case.
Be careful not to damage the mating
surfaces,
Apply liquid sealant to the maling surface of the
gear case cover.
GEAR TOOTH CONTACT PATIERN
CHECK
Apply a thin coat of Prusslan Blue to the pinion
gear teeth for a gear tooth contact pattern check.
Place the wave washer and ring gear into the gear
ca...
Apply gear oil to the Itp of the oil seal on the gear
case cover and install the gear case cover.
Tighten the cover bolls in 2-3 steps until the cover
evenly touchs the gear case, then tighten the 8 mm
bolts to the specified torque in a crisscross pattern
in twO or more steps.
TORQUE: 23-28 N·m 12.3-2.8 kg·m, 17-20 ft-Ib)
Then tighten the 10 mm bolts.
TORQUE: 40-50 N·m 14.5-5.0 kg-m. 33-36 ft-Ibl
14-14
PRUSSIAN BLUE
BmmBOLTS
WAVE WASHER
10 mm BOLTS