Honda V65 MAGNA 1985 Manual page 122

CLUTCH
LOCK NUT WRENCH
07916-4220000
LIFTER ROD
LIFTER PLATE
BEARING LIFTER GUIDE
When servicing the clutch with the engine out
of the frame, shift the transmission into gear
and hold the output shaft with the HOLDER
07923-6890101.
Install the clutch lifter rod.
Place the transmission in 6th gear.
Apply the brake and tighten the lock nut.
Install the clutch filter plate, lifter guide, end bear-
ing.
TORQUE: 63--67 N'm (6.3-6.7 kg-m, 46-48 ft-Ibl
NOTE:
Install the snap ring.
7-21