Honda V65 MAGNA 1985 Manual page 115

CLUTCH
Install the rear brake pedal.
Shift the transmission into high gear and apply the
rear brake.
NOTE;
When the engine is not in the frame. shift the
transmission into gear and use the MAIN-
SHAFT HOLDER, PIN 07923--6890100.
to
hold the final shaft.
Remove the lock nut and lock washer.
Remove the clutch spring set plate, clutch spring,
and washer.
Remove the clutch pressure plate.
Remove the clutch plates and discs.
LOCK NUT WRENCH
07916-4220000
DISCSAND PLATES CLUTCH PRESSURE PLATE
~
,
Remove clutch center B and the one-way clutch as
an assembly.
7-14
ONE WAY CLUTCH