CLUTCH
STARTER CLUTCH ASSEMBLY
Install the primary drive gear onto the crankshaft
while moving the primary driven subgear with a
screwdriver.
Install the thrust washer on the crankshaft.
Install the starter idler gear and shaft.
Install the springs, plungers, and roUers into the
starter clutch.
Install the dowel pin.
t
nstall the stafter clutch cOl/er aligning the dowel
pin hole with the dowel pin and tighten the bolts.
TORQUE; 26-30 N·m (2.6-3.0 ki"m. 19-22 ft·lb)
NOTE
I
Applva locking agent to the bolt thr!!ads.
ROLLER
PRIMARY DRIVE GEAR
SCREWDRIVER
IDLER GEAR SHAFT
.
STARTER IDLER GEAR
PLUNGER
7-22
DOWEL PIN
CLUTCH COVER