Oil Pressure Switch - Honda V65 MAGNA Shop Manual

SWITCHES
V65MAGNA
Oil PRESSURE SWITCH
Drain the engine oil.
Disconnect the oil pressure switch lead and remove
the switch.
Check for continuity while applying pressure to the
switch. .
Replace the switch if necessary.
Apply a liquid sealant to the switch threads before
installing the switch.
Screw the switch into the crankcase and leave two
threads from the bottom. Then tighten it to the
specified torque.
TORQUE: 10-14 N·m (1.0-1.4 kg-m, 7-10 ft-Ib)
NOTE:
Do not overtighten the switch, or the crank-
case may be damaged.
BRAKE LIGHT SWITCH
Check the rear brake light switch for continuity
with the rear brake applied.
Check the front brake light switch for continuity
with the front brake applied.
Replace the switches if necessary.
CONTINUITY: BELOW
0.3 ± 0.1 kg/cm
2
(4.3 ± 1.4 psi)
01 L PRESSURE SWITCH
REAR BRAKE LIGHT SWITCH
FRONT BRAKE LIGHT SWITCH
322
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.