Honda V65 MAGNA 1985 Manual page 155

Install the cylinder head and temporarily install the
cylinder head bolts.
NOTE:
Do not tighten the cylinder head bolts at this
time.
CYLINDER HEAD/VALVE
CYLINDER HEAD BOLTS
With the cam chain tensioner raised in the direction
of the arrow, insert a pin or piece of wire through
the hole in the tensioner base and 1805ioner.
Pass the cam chain through the cam chain tensioner
and install the tensioner slipper as shown.
NOTE:
Check that the lower end of the slipper fits
in the slipper base correctly.
TENSIONER BASE
\
r
TENSIONER
TENSIONER BASE
HOLE
TENSIONEA SLIPPER
CLIP
PIN
10-17