Honda V65 MAGNA 1985 Manual page 111

CLUTCH
PISTON 0.0. INSPECTION
Check the piston fOf SCOf'ing or scratd'les.
Measure the outside diameter of the piston with a
micrometer.
SERVICE LIMIT: 38.02
mm
(1.497 inl
CYLINDER 1.0. INSPECTION
Check the slave cylinder for scoring or scratches.
Measure the inside diameter of the cylinder bore.
SERVICE LIMIT: 38.18 mm (1.503 in)
~~
SILICONE
GREASE
ASSEMBLY
Assemble the slave cylinder in the reverse order of
disassembly. The oil seals must be replaced with
new ones whenever they have been removed.
Lubricate the piston and piston sear with a medium
grade of Hi-Temper.ture silicone grease or brake
fluid before assembly.
B. certain the piston seat is seated in the piston
groove.
Place the piston in the cylinder with the oil seat
end facing out.
7-10
OIL SEAL
t
INSULATOR
SLAVE CYLINDER BODY
AFTER '85:
- -l
L~'