Install the calipers over the brake discs so that the
discs are positioned between the pads, making sure
not to damage the pads. Install the caliper pivot
botts.
Install the caliper bolts.
Install the pad pin retainer bolts.
REAR PAD REPLACEMENT
Replace the rear brake pllds using the same method
as used for front brake pad replacement.
HYDRAULIC BRAKES
PAD PIN RETAINER BOLT
CALIPER BOLT
PAD PIN RETAINER BOLT
DISC THICKNESS
Measure the disc thickness with a micrometer.
SERVICE LIMITS:
FRONT: 4.0
mm
10.16
in)
REAR:
'83,84, '85: 6.0
mm
(0.24
in)
After '85: 6.6 mm (0.26 in)
BRAKE DISC WARPAGE
Measure the brake disc warpage on a surface plate
with
a
feeler gauge.
SERVICE LIMIT: 0.30 mm 10.012 in)
'83. '84. '85:
After '85:
17-7