BUSHING/BACK-UP RING
Visually inspect the slider and fork tube bushings.
Replace the bushings if there is excessive scoring or
scratching, or if the teflon is worn so that the
copper surface appears on more than 3/4 of the
entire surface.
Check the back-up ring; replace it if there is any
distortion at the points shown.
, ,
BUSHING
,
,
"
FRONT WHEEL/SUSPENSION
BACK·UP RING
ANTI-DIVE CASE
RemOlle the four socket bolts and remove the anti-
dive case.
ANTI-DIVE CASE
Remove the piston and spring.
Remove the boots, pivot bolt collar, and stop
rubber.
SPRING
•
PISTON
PIVOT BOLT COLLAR
0°
lO~
STOP RUBBER
15-31